- Item is Brand New
- Each successful bid on this auction is for 50 pieces.
- Can be used with 1/4" distribution tubing, Schedule 40 PVC, Polyethylene tubing, or any other waterproof material with an appropriate wall depth
- Color coded nozzles for easy installation
- Flow Rates: .15-.63GPH
- Operating Pressure: 15-35PSI
- Wetting Diameter: up to 5'
- Pattern:360 degrees
- Nozzle Size: .040 -.75"
- Trajectory: Flat
- Precipitation Rate: 2.0 - 2.8 inch/hour
- Filter Requirement: 120 Mesh
The EZ-Clone 360° Mister is a replacement spray head for all EZ-Clone systems. These are a direct replacement for any damaged EZ Clone spray heads you might have. Also works great for DIY applications, requires a lower PSI for water pressure than most spray nozzles found locally at major hardware retailers. This allows for more common pumps to be user with a greater success and spray pattern using a cheaper, less powerful pump.
Frequently Asked Questions on this
Q. - What size hole should I drill to use these?
A. - 5/32" hole, depending on the material, you can screw them in just using the pilot hole, or you use a #10 wood screw to pre-thread the drilled holes.
This product was added to our catalog on Monday 28 February, 2011.